Wall Thickness Gauge(Magna effect)

Bottle Thickness Gauge



Wall Thickness Gauge(Magna effect)

Bottle Thickness Gauge

Wall Thickness Gauge(Magna effect)

Product Code : PWTG-07

A Bottle Thickness Gauge, also known as a bottle wall thickness gauge, is a tool used to measure the thickness of the walls of a bottle. A probe or sensor that is pressed up against the bottle wall serves as the gauge's primary component, and a digital readout or indicator shows the thickness measurement. The gauge can be applied to both glass and plastic bottles, among other bottle types. It can be run manually or automatically by being integrated into a production line. To ensure that every bottle has a uniform thickness, the test results can be used to modify the bottle manufacturing procedure. In order to ensure that bottles are correctly formed and adhere to industry standards for quality control, the bottling industry uses a bottle thickness gauge. A key quality control factor for bottles is their wall thickness because it has an impact on the bottle's strength, durability, and ability to be properly sealed.

Enquiry
  • Range: 0-7mm
  • Accuracy: ±1%.
  • Low range resolution: 0.01mm & 0.001mm(below 1mm).
  • Principle: Magnet-o-static.
  • Logging rate: 1,2,5,10,20 readings per second.
  • Data memory: Yes.
  • Calibration: Self-calibration using masters.
  • Weight: 300grams.
  • Power: Rechargable battery.
  • Interfaces: RS232 TTL + IrDA 1.0.

Accuracy and Thickness Range

Target Ball Thickness Range Diameter accuracy that has been calibrated using a standard probe.
  • (1.50 mm)(0.001-2.00 mm) ±2%*
  • (2.50 mm)(0.001-3.90 mm) ±2%*
  • (4.00 mm)(0.001-7.00 mm) ±2%*

Feature

  • Toughened probe tip.
  • Steel balls for precision targets.
  • Statistics of the chosen reading (Min, Max, Average, Standard Deviation, Relative Standard Deviation).
  • Up to 1500 readings can be stored.
  • Reading can be stored along with various job names, dates, months, times, and job statistics.
  • Old readings can be shown on the screen or sent to a computer for data analysis and recording.

Accessories

  • Rechargeable Battery and Charger (Battery does not need to be removed to charge).
  • RS232 cable with a 9-pin connector for computers.
  • USB-connected computer with serial to USB converter.
  • Target ball set, each with 15 pieces.
  • Wooden box for protection.

A bottle thickness gauge is a device used to measure the thickness of plastic or glass bottles. It is an essential tool for manufacturers who need to ensure the quality of their bottles and meet the required industry standards. In this article, we will discuss why and who should buy a bottle thickness gauge.

Why Buy a Bottle Thickness Gauge?

Quality Control
One of the primary reasons for buying a bottle thickness gauge is to ensure quality control. The thickness of a bottle is an essential parameter that affects its strength, durability, and overall performance. By measuring the thickness of the bottles, manufacturers can ensure that they meet the required specifications and are suitable for their intended use.

Process Optimization
A bottle thickness gauge can also be used to optimize the manufacturing process. By measuring the thickness of the bottles at different stages of production, manufacturers can identify potential problems and adjust the process to produce bottles with the desired thickness. This can improve the efficiency of the production process and reduce the risk of defects in the finished product.

Compliance with Industry Standards
Many industries have specific standards for bottle thickness, including the food and beverage, pharmaceutical, and cosmetic industries. A bottle thickness gauge can help manufacturers ensure that their bottles meet these standards and avoid costly penalties or product recalls.

Cost-Effective
Investing in a bottle thickness gauge is a cost-effective way to ensure the quality and consistency of bottles. By measuring the thickness of the bottles, manufacturers can avoid the costs associated with product defects, such as scrap or rework. This can result in significant savings in the long run.

Who Should Buy a Bottle Thickness Gauge?

Bottle Manufacturers
Bottle manufacturers should invest in a bottle thickness gauge to ensure the quality and consistency of their products. The thickness of the bottle is an essential parameter that affects its strength, durability, and overall performance. By measuring the thickness, manufacturers can ensure that their products meet the required specifications and are suitable for their intended use.

Beverage and Food Manufacturers
Beverage and food manufacturers should also invest in a bottle thickness gauge to ensure the quality of their packaging. The thickness of the bottle can affect the shelf life and quality of the product. By measuring the thickness, manufacturers can ensure that their bottles meet the required standards and can protect the product during transportation and storage.

Pharmaceutical and Cosmetic Manufacturers
Pharmaceutical and cosmetic manufacturers should also have a bottle thickness gauge to ensure the quality of their packaging. The thickness of the bottle can affect the stability and efficacy of the product. By measuring the thickness, manufacturers can ensure that their bottles meet the required standards and can protect the product from light, oxygen, and moisture.

Research and Development Teams
Research and development teams can also benefit from a bottle thickness gauge. They can use it to evaluate new materials or formulations and to optimize the manufacturing process to produce bottles with the desired thickness. This is particularly important for applications that require a high level of performance or durability, such as those used in the aerospace or medical industries.

Quality Control Departments
Quality control departments should also have a bottle thickness gauge to ensure that the products meet the required specifications. By measuring the thickness, quality control teams can ensure that the bottles used in the production meet the required quality standards and can perform as expected.

Conclusion

In conclusion, a bottle thickness gauge is an essential tool for manufacturers of plastic or glass bottles. It is a cost-effective way to ensure the quality and consistency of products, optimize the manufacturing process, and comply with industry standards. Bottle manufacturers, beverage and food manufacturers, pharmaceutical and cosmetic manufacturers, research and development teams, and quality control departments should all invest in a bottle thickness gauge to ensure the quality of their products and protect their brand reputation.